THE TUBELESS EXPERTS


SINCE 2002.

TUBELESS ADVANTAGES

We have believed in tubeless technology right from the beginning - putting a lot of pioneering research and development into this area. Now we are convinced: Tubeless is the tire technology of the future! This is true for mountain and gravel bikes and especially for road bikes.


YOUR ADVANTAGES:

  • Less rolling resistance. This crucially reduces the rolling resistance. It is even lower than in super-light competition tires.
  • More grip. Lower air pressure increases the contact patch. This brings noticeable advantages in comfort, but also significantly more grip and control in critical situations and on rough trails.
  • High puncture safety. Sudden loss of air through bursting tubes or valve tear off is impossible. At the same time puncture protection liquid seal punctures within a few tenths of a second whilst riding.

ROAD RACE



ROAD RACE

TUBELESS EASY

The Schwalbe Tubeless Easy technology allows riding pleasure without tube even for high pressure tires.

  • Tubeless tires for racing bikes, cross bikes and touring bikes are considerably lighter and also faster.
  • Easy installation and perfect and secure fit on the rim.
  • The reference for Tubeless.


TUBELESS EASY

MICROSKIN

MicroSkin envelops the entire carcass and facilitates smooth Tubeless Easy operation even for high-pressure tires. And on a side note, MicroSkin also improves the cut resistance. 


MicroSkin can be found in the Schwalbe One and our Gravel and Cross tires.

INTEGRATED TUBELESS EASY TECHNOLOGY

The turn-up construction integrates Tubeless Easy technology in the most progressive way possible. This is what makes the tire so supple and comfortable. Riding this tire feels just like the velvety motion of a classic tubular tire.


INSTRUCTIONS FOR THE FIRST ASSEMBLY:  Schwalbe Pro One and Schwalbe Pro One TT Tubeless Easy tires must be used with Doc Blue tire sealant. At least 30 ml, preferably 60 ml per tire. The tire must be run for at least 25 km directly after the sealent is added.

If the instructions for the first assembly are ignored, the sealing of the tire cannot be guaranteed.
PRO ONE

SAFE IN OPERATION, EASY TO ASSEMBLE

As experts in tubeless technology, we work hand in hand with wheel and rim manufacturers as well as industry committees. We check the compatibility of wheels, rims and tires at our in-house test center. The results are summarized in the compatibility overview. If a wheel or rim is missing from the overview, we would be happy to hear about it at info@schwalbe.com

WHAT REQUIREMENTS MUST THE OPTIMUM WHEEL FOR SCHWALBE TUBELESS ROAD BIKE TIRES MEET?

TO THE REQUIREMENTS

TIRE AND WHEEL COMPATIBILITY OVERVIEW

MTB


TUBELESS EASY

MTB EVO

  • The monofile SnakeSkin fabric on the side wall makes the tubeless conversion for the MTB extremely easy and safe. It also provides the best cut protection on the side wall.
  • For this reason, Tubeless Easy with SnakeSkin comes as standard with our high-end MTB tyres in our EVOLUTION Line.

TUBELESS READY

MTB PERFORMANCE

  • Extra-strong bead cores, with rubber reinforced sidewalls.
  • Tubeless conversion for our Performance MTB Tires

TUBELESS EASY WITH MICROSKIN OR SNAKESKIN


  • MicroSkin (up to 50mm tire width) or SnakeSkin (from 50mm tire width) cover the entire carcass and enable Tubeless Easy operation.
  • Tubeless tires for cross, gravel and touring bikes are much lighter and faster.
  • The MicroSkin and SnakeSkin provide high and maximum cutting protection respectively for the side walls.


TUBELESS FITTING


EASIER THAN YOU’D THINK!

Fit the tire as usual onto the rim. Be cautious when applying the tire levers. 

 Important: Apply assembly liquid to both tire beads before inflating (1).
Make sure the valve is between the beads when inflating (2).
Start inflating with a powerful burst of air (track pump or compressor) (3)
The tire engages audibly on the rim. Using the rim line, make sure the tire is properly in place (4).
Deflate the tire a little. Remove the valve core (valve key is supplied with Doc Blue) and fill in 60 ml of the puncture protection liquid Doc Blue (5)
For road bike tubes 30 ml are enough.


  • Strictly observe the indications regarding maximum inflation pressure of tire and rim!
  • Do not use CO2 cartridges.
    CO2 has a negative effect on the puncture protection liquid.
  • Be careful in general when using the sealing liquid. It easily causes stains on clothing or pieces of furniture.
 

TOOLS UND ACCESSORIES


FOR TUBELESS SYSTEMS:

Discover practical tools and matching accessories specifically for the Schwalbe Tubeless System.

TIRE BOOSTER

The easy way to inflate tubeless tires.
With the new TIRE BOOSTER, tubeless tire assembly can be accomplished easily. Even without a compressor. With a power of up to eleven bar every tire immediately seats itself safely on the rim and seals everything evenly. If you need an even bigger flow of air, a special adapter is also available. The 435 g light, handy cylinder is the perfect remedy for every tubeless tire assembly, whether at home or on your trips.

Art.-No. 6080.01, $ 80,00

Only for SV valves.
HOW TO USE THE TIRE BOOSTER?

Register for the newsletter now

Don't miss any more trends and new products!

The link has been copied successfully
Paste it wherever you like.