Home

Scooter and Moped tubes


Valve, Auto - 40mm
Valve, Auto - 40mm
Valve, Auto - 40mm
Valve, French Presta - 40mm

TubeArt. NoETRTOSizeValve TypePrice $Cart
10"10433340

2.50-10
2.75-10

Auto Valve - 40 mm0.00Out
10"10441300

3.00-10
3.25-10
3.50-10
90/90-10
100/90-10
120/90-10
100/80-10
110/80-10

Auto Valve - 40 mm0.00Out
10"10441330

3.00-10
3.25-10
3.50-10
90/90-10
100/90-10
120/90-10
100/80-10
110/80-10

Auto Valve - 40 mm - 30degrees19.45Out
10"10441340

3.00-10
3.25-10
3.50-10
90/90-10
100/90-10
120/90-10
100/80-10
110/80-10

Auto Valve - 40 mm - 90degrees19.45Add
12"10434340

2.75-12
3.00-12

Auto Valve - 40 mm19.45Out
16"10435340

2-16
2 1/4 -16
2 1/2 -16
2-17
2 1/4 -17
2 1/2 -17

20 x 2.00
20 x 2.25
20 x 2.50
21 x 2.00
21 x 2.25
21 x 2.50

Auto Valve - 40 mm13.55Add
16"10435341

2-16
2 1/4 -16
2 1/2 -16
2-17
2 1/4 -17
2 1/2 -17

20 x 2.00
20 x 2.25
20 x 2.50
21 x 2.00
21 x 2.25
21 x 2.50

French, Presta Valve - 32mm0.00Out
16" and 17"10435343

2-16
2 1/4 -16
2 1/2 -16
2-17
2 1/4 -17
2 1/2 -17

20 x 2.00
20 x 2.25
20 x 2.50
21 x 2.00
21 x 2.25
21 x 2.50

French, Presta Valve - 40mm0.00Out
16" and 17"10437340

2.75-16
2.75-17

20 x 2.75
21 x 2.75

Auto Valve - 40 mm15.55Out
18"10443340

3.00-18
3.25-18
3.50-18

22 x 3.00
22 x 3.25
22 x 3.50

Auto Valve - 40 mm0.00Out
19"10439340

2-19
2 1/4 -19
2 1/2 -19

23 x 2.00
23 x 2.25
23 x 2.50

Auto Valve - 40 mm13.55Add
»

Full-height threading on stem?

Submitted by Anonymous on Wed, 10/06/2009 - 6:38pm.

Team Schwalbe,
Do your 40 mm Schraeder/Auto/American valve tubes have a threaded valve stem and lockring, similar to Presta? I’m looking to keep a few younger tubes around for a vintage Raleigh. The original tubes’ valve stems featured full-height threading (from the valve all the way down to the base, not just far enough to affix the cap) and used a lockring. I would like to keep this look on the bike. The small photo at the top of this page looks as if it has a lockring on it, but it is too small to tell for sure. 40-year-old rubber tends to be just a little unreliable!

Thanks,
Biker Jefff

Full height threaded

Submitted by Schwalbe.Support on Thu, 11/06/2009 - 11:26am.

Hi Jeff,

Yes, all of our Schraeder/Auto/American valve tubes have a fully threaded valve stem with lockring, from the top of the valve to the base where it meets the tire.
This comment is in the Scooter Tube section however, the Bicycle tubes are here:
http://www.schwalbetires.com/bike_tires/tubes/schraeder_valve
Both type of tubes have this feature.

Thanks,

Team Schwalbe

Narf

Submitted by Anonymous on Thu, 11/06/2009 - 12:09pm.

Oops. I noticed some similar questions over in the bicycle section after I sent that in. Feel free to move it.